DISCO mowers.

Perfect results in all operating conditions.

The MAX CUT mower bar is now fitted on all CLAAS front mowers and almost all DISCO rear mowers. The CLAAS name stands for professional equipment, from the smallest model to the largest.

DISCO mowers.

Perfect results in all operating conditions.

The MAX CUT mower bar is now fitted on all CLAAS front mowers and almost all DISCO rear mowers. The CLAAS name stands for professional equipment, from the smallest model to the largest.

DISCO 290-210. Rear mowers with inline mower bar

DISCO disc mowers
DISCO disc mowers

CLAAS inline bar.

The inline mower bar is extremely robust, thanks to its high-quality steel housing. Generously dimensioned gear wheels plus sturdy ball bearings ensure a long service life and high functional reliability. The notch recess on the bottom of the bar allows dirt to exit at the rear. The bar is also brushed clean by the stubble left standing.

DISCO disc mowers

Weight relief.

The mower bar is suspended on two coil springs, one for each half of the bar. The springs interact to maintain a steady ground pressure across the entire cutting width. This results in constant mower suspension and optimal ground-contour tracking, even in difficult operating conditions. The benefits include lower frictional resistance, protection of the grass cover, and a clean and consistent cut.

DISCO disc mowers

Convenient single-lever mechanism.

With just one control lever, the mowing unit can be raised at the headlands or swung into transport position without having to use the three-point hydraulic linkage or modify basic settings. The mowing unit is lowered to the ground evenly over its full width via the horizontal parallel lifting function. The ground pressure when mowing always remains even, and the cut clean.

DISCO disc mowers

Collision protection.

Overload protection responds immediately upon collision with an obstacle. To continue driving, the tractor needs only to be briefly backed up, after which mowing can resume. The mower bar is thus protected at all times.

DISCO disc mowers

Clean cutting.

Using a swath former, you can create a driving track between the standing crop and mowed grass. This means the next pass will be precisely aligned, with no crop soiling.

DISCO disc mowers

Drive line.

An elastic V-belt drive ensures uniform force transfer, with no peak loads, protecting both tractor and mower. The V-belt tension is indicated with visual markings. If necessary, the belt can be retensioned with a hexagonal head bolt.

DISCO disc mowers

Wear skids / high-cut skids.

For high acreages, or on sandy or stony ground, wear skids protect the mower bar and increase its service life. High-cut skids can be used to increase the chop height of the mowing unit by a further 30 mm. This enables the mowing unit to be quickly adapted to varied crop types and soil conditions.

DISCO disc mowers

Transport lock.

The mowing unit can be folded up for transport via a single-acting ram. A mechanical lock is also provided to secure the unit in place during transport. This ensures that the unit is held firmly in place. The pivot point is located well inside the machine for a minimum transport width.