Filter by:
Your selected filters:
16
Harvesting Trends Apr 2019
pdf[...] and gives higher
cracking and crushing the hard kernels. More than 70-75% output in lesser time. The silage is also of highest quality and
kernels are cracked in JAGUAR 25 which helps in producing improves the milk production by 10-15%., making it the most
silage that is easy to digest for your herds. No additional power is sought after machine among dairy farmers and silage
required even in case of hard and dry crop. Uniform and even contractors throughout the country.
chopping length is the key to good [...]
17
LEXION 780-740 Information & Basic Field Settings
pdf[...] this will move
the spreader into the first position if it
needs to be moved further, release the
switch and turn it again.
The chaff spreader can be adjusted to
spread chaff wider. See operator’s
manual for adjustments.
TIP:
Make sure the hood has stopped
moving before releasing the switch.
TIP:
When using the chopper do just enough.
Make sure the chopper blades are
kept in good condition and worn or
damaged ones are either turned or
replaced.
Back off the stationary knives until
the desired chop length [...]
18
PDF
pdf
[...] and
hydraulically lowered 50kph rated chassis equipped with
620/40 R22.5 tyres for optimum stability. As each rotor is lifted,
it automatically lowers to keep transport height to below 4.0m.
New V-MAX chopping cylinder
For 2010, a new 20-blade V-MAX chopping cylinder will be
fitted as standard on the JAGUAR 900 range.
The advantage of this new chopping cylinder, is that the 20-
blade cylinder will provide a wide range of chop lengths from
4mm up to 22mm, but without the need to remove blades
which was necessary on the 36 [...]
19
TUCANO Information & Basic Settings
pdf[...] of
above.
• When using the chopper do ‘Just Enough’, excessive chopping uses engine power.
• Make sure the chopper blades are kept in good condition and worn or damaged
ones are either turned or replaced.
• Back off the stationary knives until the desired chop length is met.
• The position of the straw chopper hood can be moved to suit the spread width or
for transport and straw rowing up purposes. It is operated by the turnbuckles on
each side and adjusting it up the notched brackets.
Settings Aid [...]
20
PDF
pdf
[...] with 25 knives
giving a minimum chop length of 4.8cm.
The operator can engage either 0; 12; 13 or all 25 knives.
Instead of using all the knives for a short chop, the
operator can opt to use half the blades for a longer chop
length and then once these need re-sharpening, the
second half set can then be used.
Another new feature of the ROTO CUT unit is the ability to
hydraulically lower the
Archie Smith,
Lanarkshire
In addition to his ROLLANT 255RC and
ROLLANT 250CCT balers, Archie Smith has been
running [...]
Page 4 of 6 (29 results)
