XERION 5000-4000

We believe that size is everything, provided that it can also do everything.

XERION 5000-4000

We believe that size is everything, provided that it can also do everything.

Steering axles.

XERION 5000-4000
  • Each axle is designed for loads up to 15 t at 50 km/h*
  • No front wheel lead
  • Six different special steering programs
  • Axle oil cooled by two separate coolers
  • Turning radius 15.7 m

*Availability varies according to country

Steering programs.

  • Remain active at the headland
  • Steering programs are overridden by sharp steering lock (except for drive lever steering)
  • Maximum speed of 20 km/h when a special steering program is activated
XERION 5000-4000

Standard steering program:

  • Combination of all-wheel and front-axle steering
  • From 5° steering lock on the front axle, the rear axle follows the front axle electrohydraulically
  • From 12 km/h, continuous reduction in steering lock
  • Fully locked at 40 km/h
XERION 5000-4000

All-wheel steering:

  • Rear axle is steered at the same time as the front axle but in the opposite direction
  • Axles move simultaneously

Main application:

  • Typical field applications such as cultivation and drilling
  • Highly manoeuvrable
  • GPS steering only available in standard steering mode and gentle mode
XERION 5000-4000

Single-sided crab steering:

  • Rear axle moves diagonally to front axle
  • Rear axle controlled via the CMOTION

Main application:

  • All work on slopes
  • Ideal to prevent drift on sloping ground
XERION 5000-4000

Gentle mode (reduced crab steering):

  • Rear axle moves along a parallel track to front axle
  • 75% of steering lock can be used
  • Steering corrected by the steering wheel via the front axle (up to 4°)

Main application:

  • Slurry spreading
  • Minimising the number of passes
  • GPS steering available
XERION 5000-4000

Full crab steering:

  • Rear axle moves along a parallel track to front axle
  • Steering corrected directly via all-wheel steering
  • Can also be controlled via CMOTION

Main application:

  • Rolling work on silage clamps