ELIOS 240-210

A perfect fit, anywhere.

With its low centre of gravity and low overall height, the ELIOS can reach places that are inaccessible to conventional tractors. Front loaders, electronic spool valves and a front PTO expand its range of potential applications.

ELIOS 240-210

A perfect fit, anywhere.

With its low centre of gravity and low overall height, the ELIOS can reach places that are inaccessible to conventional tractors. Front loaders, electronic spool valves and a front PTO expand its range of potential applications.

Hydraulics to meet every need.

ELIOS 240-210

3-pump hydraulic circuit with a total flow rate of 111 l/min: 85 l/min for the spool valves and rear linkage and 26 l/min for the steering and transmission.

Hydraulic output on demand.

The ELIOS is equipped with two hydraulic pumps as standard, which together deliver a flow of 85 l/min. One hydraulic circuit supplies the steering system at 26 l/min, while a second circuit supplies the rear linkage and spool valves at 59 l/min. A third hydraulic pump configuration is optionally available for a maximum combined flow of 111 l/min, with the steering system, rear linkage and spool valves each supplied via a separate pump. This enables overlapping actions to be performed simultaneously or device combinations with extremely high hydraulic requirements to be operated as well. Additionally, valuable fuel savings can also be achieved by operating at low engine speeds while maintaining a high hydraulic output.

In conjunction with the three-pump hydraulic circuit, the ELIOS can optionally be equipped with up to four electronic spool valves, two of which are operated via the ELECTROPILOT, and the other two via two rocker switches. The third and fourth ELECTROPILOT functions enable the unit to fully control the front loader.

Powerful drive. The PTOs.

The ELIOS comes with a range of PTO options. These include a ground speed PTO and a 540 ECO PTO with reduced engine speed for low diesel consumption and low noise levels during light PTO work.

  • 540 rpm
  • 540 ECO and 540 rpm
  • 540 and 1,000 rpm

PTO engagement is hydraulically supported as standard. With the REVERSHIFT transmission there is an option of electronic PTO engagement.