VOLTO tedders

A wider spread –

With the VOLTO tedder range, CLAAS delivers modern technology in working widths of 4.50 to 13.00 m with trailed or three-point linkage attachment.

VOLTO tedders

A wider spread –

With the VOLTO tedder range, CLAAS delivers modern technology in working widths of 4.50 to 13.00 m with trailed or three-point linkage attachment.

Crop intake.

VOLTO tedders

Improved harvesting performance.

To produce high-quality forage, the harvested crop must be dried out evenly. The tines on VOLTO machines are therefore equipped with fingers of equal length. These pick up the crop in layers, and ensure that it is mixed thoroughly. The result is a homogeneous spreading pattern that facilitates rapid drying out of the harvested crop.

VOLTO tedders

Layer by layer.

A further advantage of layered pick-up is that the front and rear tines are loaded evenly, which greatly extends their service life. Should you find you have to replace a tine, however, you always have a suitable spare, since the equal finger length allows the tines to be used in either direction of rotor rotation.

VOLTO tedders

Greater reliability.

To cushion loads, the tines feature five windings. With a material thickness of 9.5 mm, however, these are rigid enough to deliver clean raking. To protect animals and following harvesting machinery, each spreader arm is equipped with a tine loss guard. These guards prevent lost tines and, thanks to their trapezoid shape, prevent the forage from becoming wrapped around the spreader arm.

VOLTO tedders

Intelligent configuration.

To adapt the machine to the prevailing harvesting conditions, the spreading angle can be set over a range from 12° to 18° depending on the model. Meanwhile, the tines can also be adjusted forwards or backwards by 7°, allowing you to fine-tune your desired spreading pattern.

VOLTO tedders

Clean cut.

The headland spreading system enables you to achieve consistent drying of the crop even at the field edges. By pivoting the edge-tedding crop guard into the working area, you can restrict the trajectory of the forage, ensuring the crop remains where it belongs. This also means you are always operating with the full working width, and can prevent the wheels from tilting, which can damage the machine. The edge-tedding crop guard is also useful when working with hay. By using it as a marking aid, you always know which areas have already been processed, eliminating the potential for re-runs.

VOLTO tedders

Ready in an instant.

When working with hay, swathing at night can be useful, particularly when harvesting time frames are tight. Overnight, the hay absorbs much less moisture, which means that it dries out much faster. The night swathing transmission can be used to reduce the number of rotors by a third, and the harvested crop is deposited in multiple small swaths.

VOLTO tedders

Turning made easy.

In the headland position, you can raise the machine to pass over the areas that have already been spread. The function is also ideal for moving over small ditches or for reversing the machine.

Ideally suited to the job at hand.

For easy attachment to a range of different tractors, VOLTO machines feature a number of hole positions for the upper linkage. When using a castor guide wheel, the upper linkage runs in a slotted hole to facilitate unrestricted ground-contour following independent of the tractor.

VOLTO tedders

Quick and easy.

Hitching the VOLTO on or off takes no time at all. Simply folding out the parking stand is all it takes to ensure the machine is positioned securely. The drive shaft and hydraulic lines can then be moved into place at their designated holders. To keep the space requirement as low as possible, all models can be parked in the transport position.