Steering systems.

Right where you need them. In the field.

Even the very best operators can't be everywhere at once. That is why we have developed perfect systems for steering, measuring, visualisation and sensing.

Steering systems

Steering systems.

Right where you need them. In the field.

Even the very best operators can't be everywhere at once. That is why we have developed perfect systems for steering, measuring, visualisation and sensing.

The terminals from CLAAS.

Steering systems

The right combination.

The perfect choice, always.

The design of the COPILOT terminal means that it can only be used as a steering aid for the GPS COPILOT. The S7 and S10 terminals are different: they can be used either to assist manual steering with the GPS COPILOT or with the GPS PILOT FLEX and GPS PILOT automatic steering systems.

Steering systems

COPILOT terminal

GPS COPILOT

Steering systems

S7 terminal

GPS COPILOT
GPS PILOT FLEX
GPS PILOT

Steering systems

S10 terminal

GPS COPILOT
GPS PILOT FLEX
GPS PILOT

Steering systems

Driving modes.

We have the answer – whichever driving strategy you choose. The GPS PILOT / GPS PILOT FLEX driving modes.

  • A-B mode.
    Steering systems

    The first pass is defined by setting the points A and B. All other passes are made at a constant distance (corresponding to the set working width) from the first pass. This means that the field can be divided into blocks and worked through block by block.

  • Contour mode.
    Steering systems

    The contour guidance function is normally used for headland turning or for tracking slightly curved field boundaries.

  • A-B contour mode.
    Steering systems

    The A-B contour mode can be used, for example, to log a reference line on a slightly curved field boundary. The other passes are calculated by parallel shifting of the reference line as defined by the set working width. This means the field can be divided into blocks and worked in any sequence.

  • Adaptive A-B contour mode.
    Steering systems

    The adaptive A-B contour function makes it possible to bypass obstacles by recording a new section. This section is inserted into the existing A-B contour and is available for the rest of the field. The end of an existing track can also be extended by adding another section.

  • A+ angle mode (reference track transfer).
    Steering systems

    This driving mode allows adjustment of the track when several machines are working in parallel. After the A point has been set, the B point is determined by the angle information for another machine and the reference track is aligned accordingly.

  • Circle mode.
    Steering systems

    The circular tracking mode is used for working in a circular pattern. You can set the first circular track and then work either side of it. All other passes are made at a constant distance (corresponding to the set working width) from the first track.