Wrapper unit

With two 750-mm wrapping arms, the UNIWRAP tightly wraps six layers of film around the bale in just 23 seconds. The wrapper is thus always ready for the next delivery from the baler. This means the ROLLANT can be driven at full speed, despite the wrapper.

The film is pre-stretched by 67% and then wrapped around the bale at this tension for optimal, airtight results. The film can also be pre-stretched by 82% to cut down on film consumption. This reduces handling costs and extends the range of your film stocks.

Back-up wrapping function.
If either of the two rolls of film runs out before the wrapping cycle is complete, the unfinished bale is carefully wrapped at half speed using the other film roll.

Hillside operation.
The bale is rotated very smoothly on the wrapping table while two wrapping arms, powered by the new high-speed wrapper-arm drive, rapidly revolve around the bale. The bale remains securely positioned on the wrapping table, thanks to the high guide plates and the support rollers.

There are large storage compartments located to the left and right, behind the tightly shut side panels. Each compartment can accommodate six rolls of film, giving you 20% more film on board than before.
The two film compartments can be opened hydraulically at the touch of a button – each side independently.

This makes life much easier for you when it comes to loading and unloading the UNIWRAP with new rolls of film.